Off-axis reflection parallel light tube installation and maintenance methods are introduced

Off-axis reflection parallel light tube is a high brightness, high reliability lighting system, often used in semiconductor production and medical devices and other applications. This paper introduces the installation and maintenance method of off-axis reflection parallel light tube.

I. Installation of off-axis reflection parallel optical tube

1, choose the appropriate installation position: off-axis reflection parallel optical tube needs to be installed in a relatively fixed position to ensure the consistency of the direction of light. At the same time, consider the ambient temperature, humidity, dust and other factors around the optical tube.

2. Installation bracket: Prepare the installation bracket before installation, and install it on the wall or ceiling according to the specific situation.

3. Install the optical tube: Insert the optical tube into the support and fix it.

4. Wiring: Insert the power cord into the interface and fix it.

5, debugging: power on, debugging. If necessary, it can be adjusted and installed according to the specific situation.

Second, off-axis reflection type parallel optical tube maintenance

1, clean: off-axis reflection type parallel light tube needs to be cleaned regularly to ensure its brightness and life. Before cleaning, turn off the power supply. Use a soft cloth or cotton yarn dipped in the wiping solution to wipe the inside and outside surfaces. Clean gently to avoid collision.

2, replacement: If the light tube filament is found damaged or blown, it needs to be replaced in time. Before replacement, turn off the power, remove the support, remove the old lamp, install the new lamp, and debug it again.

3, maintenance: If other faults are found, timely maintenance is required. If the parts need to be replaced, the original parts should be selected to ensure the stability and life of the optical tube.

In short, the installation and maintenance of off-axis reflective parallel optical tubes requires caution and care. Reasonable installation and regular maintenance can ensure the brightness and life of the optical tube, reduce the failure rate, and improve system reliability.